Welcome to the ArcPad help libraryWhat can you do with ArcPadWhat's new in ArcPad 10.2.6What's new in ArcPad 10.2.5What's new in ArcPad 10.2.4What's new in ArcPad 10.2.3What's new in ArcPad 10.2.2What's new in ArcPad 10.2.1What's new in ArcPad 10.2Customizing ArcPadTips on learning ArcPadQuick tour of installing ArcPadEnter your registration codeSystem requirements for WindowsBefore installing to WindowsInstalling ArcPad on WindowsUninstalling ArcPad from WindowsSystem requirements for Windows MobileBefore installing to Windows MobileInstalling ArcPad on Windows MobileUninstalling ArcPad from Window MobileTroubleshoot your Windows Mobile installationOverview of Windows MobileSupported mobile devicesSelecting a Mobile DeviceTransferring data to a Windows Mobile deviceUsing the ArcPad Deployment Manager to install to Windows MobileWindows Mobile resourcesOverview of Starting ArcPadStarting ArcPad from the Windows Mobile Start menuOverview of Running ArcPad within a skinRunning ArcPad within a skin on desktop PCsRunning a skin directly from the ArcPad desktop iconCreating a skin definition fileOverview of Opening a mapOpen an existing MapCreating a new mapGetting started with a new QuickProjectOverview of saving map and exiting ArcPadSaving a mapSaving as a new mapExiting ArcPadWhat is a location sensor?Introduction to GPSIntroduction to rangefindersSupported GPS protocolsSupported rangefinder protocolsConnecting your GPS receiverConnecting your rangefinderOverview of setting communication parametersSetting the GPS protocol, port, and baud rateSetting the advanced serial port parametersActivating GPSSteps to activate your GPSActivating your rangefinderThe GPS/Rangefinder Debug toolTroubleshooting your GPS connectionNMEA 0183 sentencesOverview of GPS Position WindowThe GPS Status BarThe GPS Position windowOpening the GPS Position WindowClosing the GPS Position WindowSteps to select the position coordinate systemSteps to select the position measure of qualityOverview of navigating with your GPSSelecting a navigation destination using the Go To toolSteps to select a navigation destination using the Find toolSelecting a navigation destination using the Advanced Select toolSelecting a navigation destination using the Go To Selected Feature toolDisplaying the distance and bearing to the destinationDisplaying the bearing on the compassOverview of setting the distance alertSetting the alert message and soundSetting distance alertOverview of rotating the map orientationStopping or clearing automatic map rotationActivating the Automatic Map Rotation toolThe GPS TracklogOverview of starting and stopping the GPS TracklogStarting the GPS TracklogStopping the GPS TracklogSupported digital camerasOverview of camera optionsSetting camera optionsOverview of taking a photoTaking a standalone photoTaking a photo associated with a featureTaking a photo with the camera toolOverview of creating a photo layerSteps to create a photo layerUsing existing dataOptions to secure ArcPad dataOverview of creating new dataCreating new shapefilesCreating a QuickFormCreating a new graphics layerCreating a new photo layerGetting started with a new QuickProjectWhat are Quick Project templates?Creating QuickProject TemplatesWhat are Quick Fields?What is Expression Builder?Add a new layer expressionAdd a new global expressionDelete an expressionCustomize Expression BuilderCreating mapsOverview of creating a new mapOpening a new map from the Windows Mobile Start menuOpening a new map on a desktop PCOpening a new map in ArcPadOverview of adding layersAdding layers to your ArcPad mapLayer iconsOverview of adding shapefilesAdding shapefiles to your ArcPad mapOverview of adding ArcPad AXF layersAdding AXF layers to your ArcPad mapOverview of adding imagesAdding images to your ArcPad mapOverview of adding graphics layersAdding graphics layers to your ArcPad mapAdding basemap servicesAdding a new ArcGIS Online basemap serviceAdding an existing Bing Map serviceAbout coordinate systemsSpecifying a coordinate systemSteps to specify a coordinate systemOverview of managing layersOverview of turning a layer's visibility on or offSteps to turn a layer's visibility on or offChanging a layer's drawing orderRemoving a layer from the mapSelecting a layer for the Identify toolSelecting a layer for editingLayer propertiesChanging layer propertiesCreating a transparent layerActivating the Map Grid layerSetting the style of the Map Grid layerOverview of symbologyHow symbology works in ArcPadArcPad support of ArcGIS symbologyDisplay qualityOverview of displaying symbologyDisplaying the current maps symbologyDisplaying a layers symbologyOverview of defining simple symbology in ArcPadDefining a point layers simple symbologyOverview of defining complex symbology in ArcPadSteps to define complex symbologyWorking with scale-dependent symbologyDefining scale dependencies to display symbologyLabeling features with textSteps to label feature with textQuerying your dataOverview of identifying featuresSelecting a layer for the Identify toolUsing the Identify toolOverview of using the Label toolSteps to use the Label toolOverview of hyperlinksActivating hyperlinksUsing hyperlinksOverview of finding featuresUsing the Find tool to query dataUsing a custom query form to query dataUsing the Identify tool on your queryUsing the Feature Properties tool on your queryUsing the Go To tool on your queryOverview of other toolsUsing other tools on your queryUsing the Find tool to locate a placeOverview of spatial and attribute indexesCreating a spatial and/or attribute index in ArcPadUsing the Advanced Select toolUsing the Identify tool with the Advanced Select toolUsing the Feature Properties tool with the Advanced Select toolUsing the Go To tool with the Advanced Select toolUsing other tools with the Advanced Select toolOverview of MeasuringUsing the Measure toolUsing the Radial Measure toolUsing the Freehand Measure toolEditing basicsAn overview of the editing processEditing using a GPSThe Edit toolbarThe Command BarSelecting a layer for editingOverview of featuresSelecting features for editing using the Select toolSelecting features for editing using the Select at GPS Position toolSelecting features for editing using the Find toolSelecting features for editing using the Advanced Select toolOverview of snappingUsing the snapping environment to create new featuresOverview of moving featuresDragging a featureMoving a point feature to an x,y location using Move ToMoving a point feature to an x,y location using the Geography page of the Feature Properties dialog boxUndoing and cancelling editsDeleting featuresOverview of creating point featuresCreating point features with the penOverview of creating line featuresSelecting the line feature toolCreating a line feature using the Line tool and the penCreating a line feature using the Polyline tool and the penCreating a line feature using the Freehand Line toolOverview of polygon featuresSelecting the polygon feature toolCreating a polygon feature using the Rectangle, Ellipse, Circle, or Freehand toolCreating a polygon feature using the Polygon tool and the penOverview of graphics layerCreating a feature in your graphics layerUsing text on a feature in your graphics layerOverview of segmented polyline featuresSteps to create segmented polyline featuresCreating repeated featuresWorking with offsetsWorking with traversesUsing simple offsets to create new polyline and polygon featuresOverview of 1 point offsetCreating a new point feature using a 1 point offsetOverview of using a 2 point offsetCreating a new point feature using a 2 point offsetLinear traverse overviewSteps to create a linear traverseCreating a radial traverseCreating new features with a GPS and rangefinderGPS Quality, Capture, and Alerts optionsOverview of creating point featuresSteps to create point features with a GPSOverview of creating line features with a GPSSteps to create line features with a GPSOverview of creating polygon features with a GPSSteps to create polygon features with a GPSCapturing 1 and 2 point offsets using a rangefinder overviewCreate features using a 1 point offset with a GPS and rangefinderCreate features using a 2 point offset with a GPS and rangefinderIntroductionExtending a lineInserting a vertexDeleting a vertexOverview of moving a vertexDragging a vertexUsing the Move To command to move a vertex to a specific x,y coordinate or GPS positionOverview of moving vertex using offsetsUsing Offsets to move a vertexUsing the Geography page to move a vertex to a specific x,y coordinateDragging the sizing handlesWorking with attributesEditing attributesIntroduction to the Datum Configuration ToolDefine datum transformationSelect default datum transformationWhat is the ArcPad Data Manager for ArcGISPreparing your data for ArcPadEnabling the ArcPad Data ManagerOverview of ArcPad Exchange Format (AXF)Creating ArcPad AXF filesUsing ArcPad AXF filesAdvantages of ArcPad AXF filesGet Data for ArcPadConfigure Project for GeoprocessingAuthor Project for ArcGIS ServerGet Data from ArcPadExporting symbology for shapefilesExporting ArcGIS stylesIncorporating photos into your workflowWhat are the ArcPad Tools for ArcToolboxArcPad Check OutArcPad Check InDeploy to Mobile DeviceProcess ArcPad ProjectQuickProject to GeodatabaseAdd feature service URL to AXFWhat is synchronization?Supported ArcGIS feature servicesPrepare data for synchronizationSync with feature servicesWhat is an ArcPad package?Create an ArcPad templateCreate an ArcPad projectUpload and share an ArcPad package in ArcGIS OnlineDownload an ArcPad package in ArcPadAdd an ArcPad project from ArcPadUpdate an ArcPad project in ArcPadArcPad AXF Reader for FMEAXF and the ArcGIS Data Interoperability extensionView an AXF in ArcGIS DesktopArcPad StreetMap basicsStreetMap Desktop Data ExtractorThe StreetMap toolbarOverview of adding a StreetMap layerSteps to add a Street Map LayerStreetMap PreferencesOverview of finding a locationUsing the penUsing an addressUsing the GPS positionUsing Latitude and LongitudeOverview of creating stops, barriers, and pushpinsCreating a stopCreating a barrierCreating a pushpinOverview of converting locationsConverting a stop to a pushpinConverting a pushpin back to a stopConverting a pushpin to a barrierConverting a barrier back to a pushpinConverting a stop to a barrierConverting a barrier to a stopOverview of editing stops, barriers, and pushpinsEditing a stopEditing a barrierEditing a pushpinEditing a labelAdding commentsOverview of calculating a routeCreating a routeCreating an optimized routeNavigating with the driving directionsClearing a routeOverview of geocoding and routing fileA sample GRF XML documentGRF 1.1 document type definitionExploring your dataSelecting the appropriate layersExploring your selected layersLocating a FeatureUpdating your dataUsing the Advanced Select toolCapturing GPS dataEditing featuresExploring your dataSteps to explore your dataGet Data For ArcPadSteps to Get Data For ArcPadEditing related tables in ArcPadGetting Data from ArcPadSteps to Get Data From ArcPadGetting startedAdding StreetMap data to your mapExploring the StreetMap LayerGeocodingFinding a location using the geocoding dialog boxFinding a location using a pen (reverse geocoding)Converting a location to a stopAdding a second stopAdding a third stopAdding a fourth stopGenerating a routeExploring driving directionsUsing barriersOverview of making a collection of ArcPad AppsCreate App shortcut for the Elmore sample projectEditing the standard toolbars for use in an ArcPad AppCreating a new applet toolbar for use in an ArcPad AppCustomizing the Map Navigator for use in an ArcPad AppHow to make your map draw fasterUsing ModelBuilder to streamline check outChoosing the most appropriate raster format for your projectIncorporating photos into your workflowUsing data that contains attribute relationshipsHow to cache map servicesWelcome to the ArcPad Reference GuideOverview of ArcPad toolbarsToolbarsUsing the Favorites toolbar in ArcPadMain toolbarThe Browse toolbarThe Edit toolbarQuickCapture toolbarNavigation toolbarThe Command barStatus barOverview of ArcPad optionsDisplayCameraPathsFontsGeneralNavigationServerLocaleOverviewGPSAdvanced Serial Port ParametersCaptureQualityGPS HeightDatumAlertsLocationRangefinder PreferencesIntroductionSnappingScaleInformationExtentBookmarksProjectionOverviewLayersLegendSnappingOverviewLayer Properties dialog boxTracklogGrid StyleInformationLabelsSymbologyScaleHyperlinkAttributesTransparencyGeographyFilterArcIMSOverviewStylesColorFontPlacement (point features)Placement (line features)ScaleOverviewStylesPoint StyleLine StylePolygon StyleScaleIntroductionFeature Properties dialog boxAttributes (shapefile features)Attributes (AXF features)Related tablesPictureSymbologyGeography (point features)Geography (line and polygon features)Text/Style (graphics features)Overview of locales and code pagesSetting the code page for shapefilesFontsIntroductionSupported projectionsSupported datumsSupported vector dataSupported raster dataIntroductionDisplay SizeEditingDisplay QualityAUXScriptingExtensionsA quick guide to ArcPad customization filesWhy use Microsoft Device Emulators with ArcPad Studio?Enabling the Device Emulator in ArcPad Studio (for non Visual Studio users)Using the Device Emulator in ArcPad StudioWorking in Design ModeScripts, ArcPad XML, and the ArcPad Object ModelUsing the Favorites toolbar in ArcPadA quick tour of the ArcPad Toolbar ManagerCustomizing ArcPad toolbarsSteps to modify the standard toolbarsSteps to create a new applet toolbarCustomizing formsInstalling the ArcPad Today plug-inActivating the ArcPad Today plug-inUsing the ArcPad Today plug-inCustomizing the ArcPad Today plug-inArcPadToday.xml templateWhat are ArcPad Apps?Design an ArcPad AppCreate an ArcPad App shortcutDeploy an ArcPad App to other device(s)