|
|||||||||
PREV CLASS NEXT CLASS | FRAMES NO FRAMES | ||||||||
SUMMARY: NESTED | FIELD | CONSTR | METHOD | DETAIL: FIELD | CONSTR | METHOD |
java.lang.Object com.esri.arcgis.globecore.KmlLayer
public class KmlLayer
Esri KML Layer class.
Constructor Summary | |
---|---|
KmlLayer()
Constructs a KmlLayer using ArcGIS Engine. |
|
KmlLayer(Object obj)
Deprecated. As of ArcGIS 9.2, replaced by normal Java casts. KmlLayer theKmlLayer = (KmlLayer) obj; |
Method Summary | |
---|---|
void |
addExtension(Object ext)
Adds a new extension. |
boolean |
connect(IName pOptRepairName)
Connects the layer to its data source. |
void |
disconnect()
Disconnects the data from the layer. |
void |
draw(int drawPhase,
IDisplay display,
ITrackCancel trackCancel)
Draws the layer to the specified display for the given draw phase. |
void |
enumConnectionPoints(IEnumConnectionPoints[] ppEnum)
enumConnectionPoints |
boolean |
equals(Object o)
Compare this object with another |
void |
findConnectionPoint(GUID riid,
IConnectionPoint[] ppCP)
findConnectionPoint |
IEnvelope |
getAreaOfInterest()
The default area of interest for the layer. |
short |
getBrightness()
Layer brightness in percent (-100 - 100). |
void |
getClassID(GUID[] pClassID)
getClassID |
static String |
getClsid()
getClsid. |
short |
getContrast()
Layer contrast in percent (-100 - 100). |
String |
getDataDetails(String bsPadding)
Details of the layer's data. |
String |
getDataPath()
Full pathname of the KML data. |
IName |
getDataSourceName()
Name of the data object for the layer. |
Object |
getExtension(int index)
The extension at the specified index. |
int |
getExtensionCount()
Number of extensions. |
IEnvelope |
getExtent()
The extent of the GeoDataset. |
int |
getLargeImage()
Large image that represents the layer. |
int |
getLargeSelectedImage()
Large image that represents the layer when it is selected. |
double |
getLastMaximumScale()
Last maximum scale setting used by layer. |
double |
getLastMinimumScale()
Last minimum scale setting used by layer. |
double |
getLayerWeight()
Default layer position. |
int |
getMaximumRefreshInterval()
Maximun Refresh interval in seconds. |
double |
getMaximumScale()
Maximum scale (representative fraction) at which the layer will display. |
int |
getMinimumRefreshInterval()
Minimun Refresh interval in seconds. |
double |
getMinimumScale()
Minimum scale (representative fraction) at which the layer will display. |
String |
getName()
Layer name. |
String |
getPublishingDescription()
The layer description reported to the publisher. |
String |
getRelativeBase()
Base path used when storing relative path names. |
void |
getSizeMax(_ULARGE_INTEGER[] pcbSize)
getSizeMax |
int |
getSmallImage()
Small image that represents the layer. |
int |
getSmallSelectedImage()
Small image that represents the layer when it is selected. |
ISpatialReference |
getSpatialReference()
The spatial reference of the GeoDataset. |
int |
getSupportedDrawPhases()
Supported draw phases. |
String |
getTipText(double x,
double y,
double tolerance)
Map tip text at the specified location. |
short |
getTransparency()
Layer transparency in percent (0-100). |
int |
hashCode()
the hashcode for this object |
String |
ILayerGeneralProperties_getLayerDescription()
Description for the layer. |
boolean |
inWorkspace(IWorkspace workspace)
Returns TRUE if the layer is in the specified workspace. |
boolean |
isCached()
Indicates if the layer needs its own display cache. |
boolean |
isDataSourceSupported(IName name)
Indicates if the specified data object name is supported by the layer. |
boolean |
isDataValid()
Indicates if the data for the layer is currently valid. |
void |
isDirty()
isDirty |
boolean |
isLabelsVisible()
Labels are Visible. |
boolean |
isShowTips()
Indicates if the layer shows map tips. |
boolean |
isSupportsBrightnessChange()
Indicates if the layer supports brightness changes. |
boolean |
isSupportsContrastChange()
Indicates if the layer supports contrast changes. |
boolean |
isSupportsInteractive()
Indicates if the layer supports interactive effects changes. |
boolean |
isSupportsPublishing()
Indicates if the layer supports the publishing process. |
boolean |
isSupportsTransparency()
Indicates if the layer supports transparency. |
boolean |
isUsesFilter()
Indicates if the current object draws using a filter. |
boolean |
isValid()
Indicates if the layer is currently valid. |
boolean |
isVisible()
Indicates if the layer is currently visible. |
void |
load(IStream pstm)
load |
void |
prepareForPublishing()
Prepare the layer for the publishing process. |
void |
readExternal(ObjectInput in)
|
void |
refreshVisibleNodes(IGlobe pGlobe)
Refresh Visible Nodes. |
void |
removeExtension(int index)
Removes the specified extension. |
void |
save(IStream pstm,
int fClearDirty)
save |
void |
setBrightness(short brightnessValue)
Layer brightness in percent (-100 - 100). |
void |
setCached(boolean cached)
Indicates if the layer needs its own display cache. |
void |
setContrast(short contrastValue)
Layer contrast in percent (-100 - 100). |
void |
setDataPath(String dataPath)
Full pathname of the KML data. |
void |
setDataSourceName(IName name)
Name of the data object for the layer. |
void |
setGlobeContainedDataPath(String dataPath,
IGlobe rhs2)
Full pathname of the KML data within a contained part of Globe. |
void |
setLabelsVisible(boolean pLabelsVisible)
Labels are Visible. |
void |
setLayerDescription(String text)
Description for the layer. |
void |
setLayerWeight(double layerWeight)
Default layer position. |
void |
setMaximumScale(double maxScale)
Maximum scale (representative fraction) at which the layer will display. |
void |
setMinimumScale(double minScale)
Minimum scale (representative fraction) at which the layer will display. |
void |
setName(String name)
Layer name. |
void |
setRelativeBase(String basePath)
Base path used when storing relative path names. |
void |
setShowTips(boolean show)
Indicates if the layer shows map tips. |
void |
setSpatialReferenceByRef(ISpatialReference rhs1)
Spatial reference for the layer. |
void |
setSupportsInteractive(boolean supported)
Indicates if the layer supports interactive effects changes. |
void |
setTransparency(short alpha)
Layer transparency in percent (0-100). |
void |
setVisible(boolean visible)
Indicates if the layer is currently visible. |
void |
writeExternal(ObjectOutput out)
|
Methods inherited from class java.lang.Object |
---|
clone, finalize, getClass, notify, notifyAll, toString, wait, wait, wait |
Methods inherited from interface com.esri.arcgis.interop.RemoteObjRef |
---|
getJintegraDispatch, release |
Constructor Detail |
---|
public KmlLayer() throws IOException, UnknownHostException
IOException
- if there are interop problems
UnknownHostException
- if there are interop problemspublic KmlLayer(Object obj) throws IOException
KmlLayer theKmlLayer = (KmlLayer) obj;
obj
to KmlLayer
.
obj
- an object returned from ArcGIS Engine or Server
IOException
- if there are interop problemsMethod Detail |
---|
public static String getClsid()
public boolean equals(Object o)
equals
in class Object
public int hashCode()
hashCode
in class Object
public String getName() throws IOException, AutomationException
Use this property to associate a string with a layer.
getName
in interface ILayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setName(String name) throws IOException, AutomationException
setName
in interface ILayer
name
- The name (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isValid() throws IOException, AutomationException
The valid property indicates if the layer is currently valid. Layers that reference feature classes are valid when they hold a reference to a valid feature class. The property does not however validate the integrity of the feature classes reference to the database. Therefore, in rare situations if a datasource is removed after a layer is initialized, the layer will report itself as valid but query attempts to the data source will error due to the lack of underlying data.
isValid
in interface ILayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public IEnvelope getAreaOfInterest() throws IOException, AutomationException
Returns the spatial-referenced extent of the layer.
getAreaOfInterest
in interface ILayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public double getMinimumScale() throws IOException, AutomationException
Specifies the minimum scale at which the layer will be displayed. This means that if you zoom out beyond this scale, the layer will not display. For example, specify 1000 to have the layer not display when zoomed out beyond 1:1000.
getMinimumScale
in interface ILayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setMinimumScale(double minScale) throws IOException, AutomationException
setMinimumScale
in interface ILayer
minScale
- The minScale (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public double getMaximumScale() throws IOException, AutomationException
Specifies the maximum scale at which the layer will be displayed. This means that if you zoom in beyond this scale, the layer will not display. For example, specify 500 to have the layer not display when zoomed in beyond 1:500.
getMaximumScale
in interface ILayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setMaximumScale(double maxScale) throws IOException, AutomationException
setMaximumScale
in interface ILayer
maxScale
- The maxScale (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isVisible() throws IOException, AutomationException
isVisible
in interface ILayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setVisible(boolean visible) throws IOException, AutomationException
setVisible
in interface ILayer
visible
- The visible (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isShowTips() throws IOException, AutomationException
Indicates whether or not map tips are shown for the layer. If set to True, then map tips will be shown for the layer. You can determine the text that will be shown via TipText. For a FeatureLayer, this text comes from the data for IFeatureLayer::DisplayField.
isShowTips
in interface ILayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setShowTips(boolean show) throws IOException, AutomationException
setShowTips
in interface ILayer
show
- The show (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public String getTipText(double x, double y, double tolerance) throws IOException, AutomationException
getTipText
in interface ILayer
x
- The x (in)y
- The y (in)tolerance
- The tolerance (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isCached() throws IOException, AutomationException
This property indicates whether or not the layer requires its own display cache. If this property is True, then the Map will use a separate display cache for the layer so that it can be refreshed indpendently of other layers.
The Map is responsible for cache management. See IScreenDisplay::AddCache for more information on caches.
isCached
in interface ILayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setCached(boolean cached) throws IOException, AutomationException
Informational property. Container is responsible for cache management.
setCached
in interface ILayer
cached
- The cached (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public int getSupportedDrawPhases() throws IOException, AutomationException
Indicates the draw phases supported by the layer (esriDPGeography, esriDPAnnotation, esriDPSelection, or any combination of the three). The supported draw phases are defined by esriDrawPhase. When multiple draw phases are supported, the sum of the constants is used. For example, if SupportedDrawPhases = 3 then the layer supports drawing in the geography and annotation phases.
getSupportedDrawPhases
in interface ILayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setSpatialReferenceByRef(ISpatialReference rhs1) throws IOException, AutomationException
This property is only used for map display, setting this property does not change the spatial reference of the layer's underlying data. The ArcGIS framework uses this property to pass the spatial reference from the map to the layer in order to support on-the-fly projection.
setSpatialReferenceByRef
in interface ILayer
rhs1
- A reference to a com.esri.arcgis.geometry.ISpatialReference (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void draw(int drawPhase, IDisplay display, ITrackCancel trackCancel) throws IOException, AutomationException
This method draws the layer to the Display for the specified DrawPhase. Use the TrackCancel object to allow the drawing of the layer to be interrupted by the user.
draw
in interface ILayer
drawPhase
- A com.esri.arcgis.system.esriDrawPhase constant (in)display
- A reference to a com.esri.arcgis.display.IDisplay (in)trackCancel
- A reference to a com.esri.arcgis.system.ITrackCancel (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setDataPath(String dataPath) throws IOException, AutomationException
To set the DataPath pass in the UNC or local path of your KML file as a string.
setDataPath
in interface IKmlLayer
dataPath
- The dataPath (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public String getDataPath() throws IOException, AutomationException
DataPath can be the UNC or local path of your KML file as a string.
getDataPath
in interface IKmlLayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void refreshVisibleNodes(IGlobe pGlobe) throws IOException, AutomationException
This method must be called after the visibility of a KML Node has been changed via the IKmlNode interface.
The call to RefreshVisibleNodes should be followed by calls to invalidate the layer cache and redraw.
refreshVisibleNodes
in interface IKmlLayer
pGlobe
- A reference to a com.esri.arcgis.globecore.IGlobe (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public int getMinimumRefreshInterval() throws IOException, AutomationException
The KML nodes may have a "<refreshInterval>" tag in the KML file. This method would return the minimum refresh interval value (in seconds) from amongst all the KML nodes in the KML layer.
If none of the nodes has the "<refreshInterval>" tag then the function would return 0.
getMinimumRefreshInterval
in interface IKmlLayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public int getMaximumRefreshInterval() throws IOException, AutomationException
The KML nodes may have a "<refreshInterval>" tag in the KML file. This method would return the maximum refresh interval value (in seconds) from amongst all the KML nodes in the KML layer.
If none of the nodes has the "<refreshInterval>" tag then the function would return 0.
getMaximumRefreshInterval
in interface IKmlLayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setLabelsVisible(boolean pLabelsVisible) throws IOException, AutomationException
setLabelsVisible
in interface IKmlLayer
pLabelsVisible
- The pLabelsVisible (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isLabelsVisible() throws IOException, AutomationException
Placemark elements within a KML layer can display their Name property as a label in the 3D view. KML labels are billboarded to face the camera and use conflict detection in order to avoid overposting with other labels in the same KML layer.
By default, labels are visible for KML layers.
To disable labels for the KML layer set this property to False.
isLabelsVisible
in interface IKmlLayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setGlobeContainedDataPath(String dataPath, IGlobe rhs2) throws IOException, AutomationException
setGlobeContainedDataPath
in interface IKmlLayer
dataPath
- The dataPath (in)rhs2
- A reference to a com.esri.arcgis.globecore.IGlobe (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void enumConnectionPoints(IEnumConnectionPoints[] ppEnum) throws IOException, AutomationException
IConnectionPointContainer is a Microsoft interface. Please refer to MSDN for information about this interface.
enumConnectionPoints
in interface IConnectionPointContainer
ppEnum
- A reference to a com.esri.arcgis.display.IEnumConnectionPoints (out: use single element array)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void findConnectionPoint(GUID riid, IConnectionPoint[] ppCP) throws IOException, AutomationException
IConnectionPointContainer is a Microsoft interface. Please refer to MSDN for information about this interface.
findConnectionPoint
in interface IConnectionPointContainer
riid
- A Structure: com.esri.arcgis.support.ms.stdole.GUID (in)ppCP
- A reference to a com.esri.arcgis.display.IConnectionPoint (out: use single element array)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public ISpatialReference getSpatialReference() throws IOException, AutomationException
This property is read only. For layers, when the first layer is added to ArcMap, its spatial reference is read by this property, and the map is set to this spatial reference.
Instances of the esriCarto.GroupLayer class will return null for this property, as a group layer can contain multiple datasets with different spatial references.
Modifications to a spatial reference returned by this property will not be persisted. To modify the spatial reference of a dataset, the IGeoDatasetSchemaEdit and IGeoDatasetSchemaEdit2 interfaces should be used.
getSpatialReference
in interface IGeoDataset
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public IEnvelope getExtent() throws IOException, AutomationException
The IGeoDataset::Extent property returns an envelope representing the maximum extent of data which has been stored in the dataset.
Consider the following scenario. A new feature class has features added to it. The IGeoDataset::Extent is then requested and an envelope is returned. The extents of the envelope returned are represented by the red box in the image below.
If a portion of the features were then deleted and the extent is again requested an envelope with the exact same extents as during the first request would be returned (see image below). This is because the deletion of features does not shrink the extent. However all additions of features outside the red box would increase the envelope returned to encompass the newly added features.
If you would like to update the IGeoDataset::Extent property to reflect the current features in your dataset please see IFeatureClassManage::UpdateExtent (also see IFeatureClassLoad). In the image below the extent has been updated and a new envelope is being returned.
ESRI's GroupLayer implements this property differently from most other layer coclasses. When you instantiate a new GroupLayer, this property will return a valid envelope with zero height and width. With most other newly instantiated layers (for example FeatureLayer, RasterLayer, TinLayer), this property initally returns Nothing.
getExtent
in interface IGeoDataset
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void isDirty() throws IOException, AutomationException
IPersistStream is a Microsoft interface. Please refer to MSDN for information about this interface.
isDirty
in interface IPersistStream
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void load(IStream pstm) throws IOException, AutomationException
IPersistStream is a Microsoft interface. Please refer to MSDN for information about this interface.
load
in interface IPersistStream
pstm
- A reference to a com.esri.arcgis.system.IStream (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void save(IStream pstm, int fClearDirty) throws IOException, AutomationException
IPersistStream is a Microsoft interface. Please refer to MSDN for information about this interface.
save
in interface IPersistStream
pstm
- A reference to a com.esri.arcgis.system.IStream (in)fClearDirty
- The fClearDirty (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void getSizeMax(_ULARGE_INTEGER[] pcbSize) throws IOException, AutomationException
IPersistStream is a Microsoft interface. Please refer to MSDN for information about this interface.
getSizeMax
in interface IPersistStream
pcbSize
- A Structure: com.esri.arcgis.system._ULARGE_INTEGER (out: use single element array)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void getClassID(GUID[] pClassID) throws IOException, AutomationException
IPersist is a Microsoft interface. Please refer to MSDN for information about this interface.
getClassID
in interface IPersist
pClassID
- A Structure: com.esri.arcgis.support.ms.stdole.GUID (out: use single element array)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public IName getDataSourceName() throws IOException, AutomationException
getDataSourceName
in interface IDataLayer
getDataSourceName
in interface IDataLayer2
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setDataSourceName(IName name) throws IOException, AutomationException
setDataSourceName
in interface IDataLayer
setDataSourceName
in interface IDataLayer2
name
- A reference to a com.esri.arcgis.system.IName (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isDataSourceSupported(IName name) throws IOException, AutomationException
isDataSourceSupported
in interface IDataLayer
isDataSourceSupported
in interface IDataLayer2
name
- A reference to a com.esri.arcgis.system.IName (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean connect(IName pOptRepairName) throws IOException, AutomationException
connect
in interface IDataLayer
connect
in interface IDataLayer2
pOptRepairName
- A reference to a com.esri.arcgis.system.IName (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public String getRelativeBase() throws IOException, AutomationException
The RelativeBase property is used internally when persisting and loading documents with a relative path. When a document has been fully loaded the path is realized to a complete path.
getRelativeBase
in interface IDataLayer
getRelativeBase
in interface IDataLayer2
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setRelativeBase(String basePath) throws IOException, AutomationException
setRelativeBase
in interface IDataLayer
setRelativeBase
in interface IDataLayer2
basePath
- The basePath (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void disconnect() throws IOException, AutomationException
disconnect
in interface IDataLayer2
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean inWorkspace(IWorkspace workspace) throws IOException, AutomationException
inWorkspace
in interface IDataLayer2
workspace
- A reference to a com.esri.arcgis.geodatabase.IWorkspace (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isUsesFilter() throws IOException, AutomationException
The UsesFilter property returns true when the object in question will draw with a filter. Drawing with a filter means means that an object that would normally draw as vector graphics will instead draw as raster. The UsesFilter property is particularly useful for detecting vector map layers that will be rasterized at time of print or export.
isUsesFilter
in interface IDisplayAdmin
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public int getSmallImage() throws IOException, AutomationException
The icon used to represent the layer in ArcCatalog's 'List' and 'Details' views.
getSmallImage
in interface ILayerInfo
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public int getSmallSelectedImage() throws IOException, AutomationException
The icon used to represent the layer when it is selected in ArcCatalog's 'List' and 'Details' views.
getSmallSelectedImage
in interface ILayerInfo
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public int getLargeImage() throws IOException, AutomationException
The icon used to represent the layer in ArcCatalog's 'Large Icon' view.
getLargeImage
in interface ILayerInfo
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public int getLargeSelectedImage() throws IOException, AutomationException
The icon used to represent the layer when it is selected in ArcCatalog's 'Large Icon' view.
getLargeSelectedImage
in interface ILayerInfo
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isSupportsTransparency() throws IOException, AutomationException
isSupportsTransparency
in interface ILayerEffects
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isSupportsContrastChange() throws IOException, AutomationException
isSupportsContrastChange
in interface ILayerEffects
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isSupportsBrightnessChange() throws IOException, AutomationException
isSupportsBrightnessChange
in interface ILayerEffects
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setSupportsInteractive(boolean supported) throws IOException, AutomationException
setSupportsInteractive
in interface ILayerEffects
supported
- The supported (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isSupportsInteractive() throws IOException, AutomationException
isSupportsInteractive
in interface ILayerEffects
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public short getTransparency() throws IOException, AutomationException
When
you set Transparency for a
FeatureLayer, a
TransparencyDisplayFilter is created and applied
to the layer. You can accomplish the same effect by manually
creating a new TransparencyDisplayFilter using IDisplayFilter, and
then assigning it to a layer using
IDisplayFilterManager.
getTransparency
in interface ILayerEffects
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setTransparency(short alpha) throws IOException, AutomationException
setTransparency
in interface ILayerEffects
alpha
- The alpha (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public short getContrast() throws IOException, AutomationException
getContrast
in interface ILayerEffects
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setContrast(short contrastValue) throws IOException, AutomationException
setContrast
in interface ILayerEffects
contrastValue
- The contrastValue (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public short getBrightness() throws IOException, AutomationException
getBrightness
in interface ILayerEffects
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setBrightness(short brightnessValue) throws IOException, AutomationException
setBrightness
in interface ILayerEffects
brightnessValue
- The brightnessValue (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public double getLayerWeight() throws IOException, AutomationException
The LayerWeight property defines the weight of the layer in the auto arrange order. During auto arrange, the higher weight layers are added to the map first, which means they draw lower in the draw order.
Default weights for layers are these values:
Annotation layers = 97
Points layers = 98
Polyline layers = 99
Polygon Layers = 100
getLayerWeight
in interface ILayerPosition
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setLayerWeight(double layerWeight) throws IOException, AutomationException
setLayerWeight
in interface ILayerPosition
layerWeight
- The layerWeight (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public int getExtensionCount() throws IOException, AutomationException
getExtensionCount
in interface ILayerExtensions
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public Object getExtension(int index) throws IOException, AutomationException
getExtension
in interface ILayerExtensions
index
- The index (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void addExtension(Object ext) throws IOException, AutomationException
addExtension
in interface ILayerExtensions
ext
- A reference to another Object (IUnknown) (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void removeExtension(int index) throws IOException, AutomationException
removeExtension
in interface ILayerExtensions
index
- The index (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isSupportsPublishing() throws IOException, AutomationException
isSupportsPublishing
in interface IPublishLayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public String getPublishingDescription() throws IOException, AutomationException
getPublishingDescription
in interface IPublishLayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public boolean isDataValid() throws IOException, AutomationException
isDataValid
in interface IPublishLayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public String getDataDetails(String bsPadding) throws IOException, AutomationException
getDataDetails
in interface IPublishLayer
bsPadding
- The bsPadding (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void prepareForPublishing() throws IOException, AutomationException
prepareForPublishing
in interface IPublishLayer
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public double getLastMinimumScale() throws IOException, AutomationException
getLastMinimumScale
in interface ILayerGeneralProperties
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public double getLastMaximumScale() throws IOException, AutomationException
getLastMaximumScale
in interface ILayerGeneralProperties
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public String ILayerGeneralProperties_getLayerDescription() throws IOException, AutomationException
ILayerGeneralProperties_getLayerDescription
in interface ILayerGeneralProperties
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void setLayerDescription(String text) throws IOException, AutomationException
setLayerDescription
in interface ILayerGeneralProperties
text
- The text (in)
IOException
- If there are interop problems.
AutomationException
- If the ArcObject component throws an exception.public void writeExternal(ObjectOutput out) throws IOException
writeExternal
in interface Externalizable
IOException
public void readExternal(ObjectInput in) throws IOException, ClassNotFoundException
readExternal
in interface Externalizable
IOException
ClassNotFoundException
|
|||||||||
PREV CLASS NEXT CLASS | FRAMES NO FRAMES | ||||||||
SUMMARY: NESTED | FIELD | CONSTR | METHOD | DETAIL: FIELD | CONSTR | METHOD |