Extent (arcpy)

Resumen

An extent is a rectangle specified by providing the coordinate of the lower left corner and the coordinate of the upper right corner in map units.

Debate

NotaNota:

When used as input to Extensión ArcGIS Spatial Analyst tools, Create Constant Raster, Create Normal Raster, Create Random Raster, Extract By Rectangle and Topo To Raster only the XMin, YMin, XMax and YMax values are used by these tools.

Sintaxis

Extent ({XMin}, {YMin}, {XMax}, {YMax}, {ZMin}, {ZMax}, {MMin}, {MMax})
ParámetroExplicaciónTipo de datos
XMin

The extent XMin value.

Double
YMin

The extent YMin value.

Double
XMax

The extent XMax value.

Double
YMax

The extent YMax value.

Double
ZMin

The extent ZMin value. None if no Z value.

Double
ZMax

The extent ZMax value. None if no Z value.

Double
MMin

The extent MMin value. None if no M value.

Double
MMax

The extent MMax value. None if no M value.

Double

Propiedades

PropiedadExplicaciónTipo de datos
MMax
(Sólo lectura)

The extent MMax value. None if no M value.

Double
MMin
(Sólo lectura)

The extent MMin value. None if no M value.

Double
XMax
(Sólo lectura)

The extent XMax value.

Double
XMin
(Sólo lectura)

The extent XMin value.

Double
YMax
(Sólo lectura)

The extent YMax value.

Double
YMin
(Sólo lectura)

The extent YMin value.

Double
ZMax
(Sólo lectura)

The extent ZMax value. None if no Z value.

Double
ZMin
(Sólo lectura)

The extent ZMin value. None if no Z value.

Double
depth
(Sólo lectura)

The extent depth value. None if no depth.

Double
height
(Sólo lectura)

The extent height value.

Double
lowerLeft
(Sólo lectura)

The lower left property: A point object is returned.

Point
lowerRight
(Sólo lectura)

The lower right property: A point object is returned.

Point
spatialReference
(Sólo lectura)

The spatial reference of the extent.

SpatialReference
upperLeft
(Sólo lectura)

The upper left property: A point object is returned.

Point
upperRight
(Sólo lectura)

The upper right property: A point object is returned

Point
width
(Sólo lectura)

The extent width value.

Double

Descripción general de los métodos

MétodoExplicación
contains (second_geometry)

Indicates if the base geometry contains the comparison geometry.

contains is the opposite of within.

Only True relationships are shown in this illustration.

Possible contains relationships
crosses (second_geometry)

Indicates if the two geometries intersect in a geometry of a lesser shape type.

Two polylines cross if they share only points in common, at least one of which is not an endpoint. A polyline and an polygon cross if they share a polyline or a point (for vertical line) in common on the interior of the polygon which is not equivalent to the entire polyline.

Only True relationships are shown in this illustration.

Possible crosses relationships
disjoint (second_geometry)

Indicates if the base and comparison geometries share no points in common.

Two geometries intersect if disjoint returns False.

Only True relationships are shown in this illustration.

Possible disjoint relationships
equals (second_geometry)

Indicates if the base and comparison geometries are of the same shape type and define the same set of points in the plane. This is a 2D comparison only; M and Z values are ignored.

Only True relationships are shown in this illustration.

Possible equals relationships
overlaps (second_geometry)

Indicates if the intersection of the two geometries has the same shape type as one of the input geometries and is not equivalent to either of the input geometries.

Only True relationships are shown in this illustration.

Possible overlaps relationships
projectAs (spatial_reference, {transformation_name})

Projects a geometry and optionally applies a geotransformation.

To project, the geometry needs to have a spatial reference, and not have an UnknownCoordinateSystem. The new spatial reference system passed to the method defines the output coordinate system. If either spatial reference is unknown the coordinates will not be changed. The Z- and measure values are not changed by the ProjectAs method.

touches (second_geometry)

Indicates if the boundaries of the geometries intersect.

Two geometries touch when the intersection of the geometries is not empty, but the intersection of their interiors is empty. For example, a point touches a polyline only if the point is coincident with one of the polyline end points.

Only True relationships are shown in this illustration.

Possible touches relationships
within (second_geometry)

Indicates if the base geometry is within the comparison geometry.

within is the opposite operator of contains.

Only True relationships are shown in this illustration.

Possible within relationships

Métodos

contains (second_geometry)
ParámetroExplicaciónTipo de datos
second_geometry

A second geometry.

Object
Valor de retorno
Tipo de datosExplicación
Boolean

A return Boolean value of True indicates this geometry contains the second geometry.

crosses (second_geometry)
ParámetroExplicaciónTipo de datos
second_geometry

A second geometry.

Object
Valor de retorno
Tipo de datosExplicación
Boolean

A return Boolean value of True indicates the two geometries intersect in a geometry of a lesser shape type.

disjoint (second_geometry)
ParámetroExplicaciónTipo de datos
second_geometry

A second geometry.

Object
Valor de retorno
Tipo de datosExplicación
Boolean

A return Boolean value of True indicates that the two geometries share no points in common.

equals (second_geometry)
ParámetroExplicaciónTipo de datos
second_geometry

A second geometry.

Object
Valor de retorno
Tipo de datosExplicación
Boolean

A return Boolean value of True indicates that the two geometries are of the same shape type and define the same set of points in the plane.

overlaps (second_geometry)
ParámetroExplicaciónTipo de datos
second_geometry

A second geometry.

Object
Valor de retorno
Tipo de datosExplicación
Boolean

A return Boolean value of True indicates the intersection of the two geometries has the same dimension as one of the input geometries.

projectAs (spatial_reference, {transformation_name})
ParámetroExplicaciónTipo de datos
spatial_reference

The new spatial reference. This can be a SpatialReference object or the coordinate system name.

SpatialReference
transformation_name

The geotransformation name.

String
Valor de retorno
Tipo de datosExplicación
Object

The projected geometry.

touches (second_geometry)
ParámetroExplicaciónTipo de datos
second_geometry

A second geometry.

Object
Valor de retorno
Tipo de datosExplicación
Boolean

A return Boolean value of True indicates the boundaries of the geometries intersect.

within (second_geometry)
ParámetroExplicaciónTipo de datos
second_geometry

A second geometry.

Object
Valor de retorno
Tipo de datosExplicación
Boolean

A return Boolean value of True indicates this geometry is contained within the second geometry.

Ejemplo de código

Extent example

Display extent object properties for features.

import arcpy
fc = "c:/Data/Florida.gdb/airports"

# Fetch each feature from the cursor and examine the extent properties
#
for row in arcpy.da.SearchCursor(fc, ["SHAPE@", "CNTY_NAME"]):
    ext = row[0].extent
    print("Extent of {0}:".format(row[1]))
    print("XMin: {0}, YMin: {1}".format(ext.XMin, ext.YMin))
    print("XMax: {0}, YMax: {1}".format(ext.XMax, ext.YMax))

Temas relacionados

9/11/2013