com.esri.arcgis.geoprocessing.tools.datamanagementtools
Class CollapseDualLinesToCenterline

java.lang.Object
  com.esri.arcgis.geoprocessing.AbstractGPTool
      com.esri.arcgis.geoprocessing.tools.datamanagementtools.CollapseDualLinesToCenterline

All Implemented Interfaces:

GPTool

public class CollapseDualLinesToCenterline
extends AbstractGPTool

Derives centerlines from dual-line (or double-line) features, such as road casings, based on specified width tolerances. The Collapse Dual Lines To Centerline tool is contained in the Data Management Tools tool box.

Illustration:

Usage tips:

• This tool is designed to work with fairly regular, near parallel pairs of lines, such as large-scale road casings. Centerlines will be created only between open-ended lines, not inside closed lines which are likely street blocks.
• Centerlines will be derived based on the specified width parameters. A dual-line feature wider than the Maximum Width or narrower than the Minimum Width will not be centerlined. Use known road widths if available. However, since casings usually become wider at intersections, set the Maximum Width slightly greater than the known maximum width. You may need to experiment to find suitable parameters.
• The output feature class will not carry the geographic attributes from the input lines, but contain the following three new fields:
  • LnType—Contains the following line type values:
  • LeftLn_FID—Carries the object ID of the input line to the left of a derived centerline. This field value will be zero for lines of LnType 2 and 3.
  • RightLn_FID—Carries the object ID of the input line to the right of a derived centerline. This field value will be zero for lines of LnType 2 and 3.
  You can use the LnType values to further inspect the unresolved intersections and wider roads; and you can use the LeftLn_FID and RightLn_FID fields along with Join Field tool to transfer the attributes from source lines to the centerlines as needed.
• Since the tool is not designed for natural features, such as irregularly shaped double-line rivers, you may get unexpected results if you apply it to such features. The tool may also produce unexpected results if you apply it to relatively smaller-scale road data, such as multiple-lane highways with interchanges, ramps, overpasses and underpasses, or railways with multiple, merging tracks.
• This tool is not supported in an edit session.
• Learn more about spatial reference and geoprocessing
• The following environment settings affect this tool: XY tolerance, Extent, M domain, Coordinate system, Output has M values, Output has Z values, Default Z value, Output XY domain, workspace, and scratch workspace.

Field Summary

Fields inherited from class com.esri.arcgis.geoprocessing.AbstractGPTool

vals

Constructor Summary

CollapseDualLinesToCenterline()
Creates the Collapse Dual Lines To Centerline tool with defaults.

CollapseDualLinesToCenterline(Object inFeatures, Object outFeatureClass, Object maximumWidth)
Creates the Collapse Dual Lines To Centerline tool with the required parameters.

Method Summary

Object	getInFeatures() Returns the Input Features parameter of this tool .
Object	getMaximumWidth() Returns the Maximum Width parameter of this tool .
Object	getMinimumWidth() Returns the Minimum Width parameter of this tool .
Object	getOutFeatureClass() Returns the Output Feature Class parameter of this tool .
String	getToolboxAlias() Returns the alias of the tool box containing this tool.
String	getToolboxName() Returns the name of the tool box containing this tool.
String	getToolName() Returns the name of this tool.
void	setInFeatures(Object inFeatures) Sets the Input Features parameter of this tool .
void	setMaximumWidth(Object maximumWidth) Sets the Maximum Width parameter of this tool .
void	setMinimumWidth(Object minimumWidth) Sets the Minimum Width parameter of this tool .
void	setOutFeatureClass(Object outFeatureClass) Sets the Output Feature Class parameter of this tool .

Methods inherited from class com.esri.arcgis.geoprocessing.AbstractGPTool

getParameterValues, toString

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Constructor Detail

CollapseDualLinesToCenterline

public CollapseDualLinesToCenterline()

Creates the Collapse Dual Lines To Centerline tool with defaults.

Initializes the array of tool parameters with the default values specified when the tool was created.

CollapseDualLinesToCenterline

public CollapseDualLinesToCenterline(Object inFeatures,
                                     Object outFeatureClass,
                                     Object maximumWidth)

Creates the Collapse Dual Lines To Centerline tool with the required parameters.

Initializes the array of tool parameters with the values as specified for the required parameters and with the default values for the other parameters.

Parameters:

inFeatures - Feature Layer, the input dual-line features, such as road casings, from which centerlines are derived.

outFeatureClass - Feature Class, the output feature class to be created.

maximumWidth - Linear Unit, sets the maximum width of the dual-line features to derive centerline. A value must be specified, and it must be greater than zero. You can specify a preferred unit; the default is the feature unit.

Method Detail

getInFeatures

public Object getInFeatures()

Returns the Input Features parameter of this tool . This parameter is Feature Layer, the input dual-line features, such as road casings, from which centerlines are derived. This is a required parameter.

Returns:

the Input Features

setInFeatures

public void setInFeatures(Object inFeatures)

Sets the Input Features parameter of this tool . This parameter is Feature Layer, the input dual-line features, such as road casings, from which centerlines are derived. This is a required parameter.

Parameters:

inFeatures - Feature Layer, the input dual-line features, such as road casings, from which centerlines are derived.

getOutFeatureClass

public Object getOutFeatureClass()

Returns the Output Feature Class parameter of this tool . This parameter is Feature Class, the output feature class to be created. This is a required parameter.

Returns:

the Output Feature Class

setOutFeatureClass

public void setOutFeatureClass(Object outFeatureClass)

Sets the Output Feature Class parameter of this tool . This parameter is Feature Class, the output feature class to be created. This is a required parameter.

Parameters:

outFeatureClass - Feature Class, the output feature class to be created.

getMaximumWidth

public Object getMaximumWidth()

Returns the Maximum Width parameter of this tool . This parameter is Linear Unit, sets the maximum width of the dual-line features to derive centerline. A value must be specified, and it must be greater than zero. You can specify a preferred unit; the default is the feature unit. This is a required parameter.

Returns:

the Maximum Width

setMaximumWidth

public void setMaximumWidth(Object maximumWidth)

Sets the Maximum Width parameter of this tool . This parameter is Linear Unit, sets the maximum width of the dual-line features to derive centerline. A value must be specified, and it must be greater than zero. You can specify a preferred unit; the default is the feature unit. This is a required parameter.

Parameters:

maximumWidth - Linear Unit, sets the maximum width of the dual-line features to derive centerline. A value must be specified, and it must be greater than zero. You can specify a preferred unit; the default is the feature unit.

getMinimumWidth

public Object getMinimumWidth()

Returns the Minimum Width parameter of this tool . This parameter is Linear Unit, sets the minimum width of the dual-line features to derive centerline. The minimum width must be greater than or equal to zero, and it must be less than the maximum width. The default value is zero. You can specify a preferred unit; the default is the feature unit. This is an optional parameter.

Returns:

the Minimum Width

setMinimumWidth

public void setMinimumWidth(Object minimumWidth)

Sets the Minimum Width parameter of this tool . This parameter is Linear Unit, sets the minimum width of the dual-line features to derive centerline. The minimum width must be greater than or equal to zero, and it must be less than the maximum width. The default value is zero. You can specify a preferred unit; the default is the feature unit. This is an optional parameter.

Parameters:

minimumWidth - Linear Unit, sets the minimum width of the dual-line features to derive centerline. The minimum width must be greater than or equal to zero, and it must be less than the maximum width. The default value is zero. You can specify a preferred unit; the default is the feature unit.

getToolName

public String getToolName()

Returns the name of this tool.

Returns:

the tool name

getToolboxName

public String getToolboxName()

Returns the name of the tool box containing this tool.

Returns:

the tool box name

getToolboxAlias

public String getToolboxAlias()

Returns the alias of the tool box containing this tool.

Returns:

the tool box alias