ArcGIS Help 10.2 - Types of spatial relationships that can be validated (Defense Mapping)

In a map display, it is likely that you will find features that spatially relate to each other, whether they are a road on a land feature or a lake surrounded by grassland. It is also possible for features from the same feature class to overlap one another and share attributes. The Geometry on Geometry check searches for features from either the same or two different feature classes that share a spatial relationship.

Spatial relationship types

The types of relationships that can be used with this check include the following:

Remarque :

The check's results are based on the relationship of feature class 1 to feature class 2, as indicated below.

Touches—A part of the feature from feature class 1 comes into contact with the boundary of a feature from feature class 2. The interiors of the features do not intersect.
Contains—A feature from feature class 1 completely encloses a feature from feature class 2.
Intersects—Any part of a feature from feature class 1 comes into contact with any part of a feature from feature class 2.
Relation—A custom spatial relationship is defined based on the interior, boundary, and exterior of features from both feature classes.
Within—A feature from feature class 2 completely encloses a feature from feature class 1.
Crosses—The interior of a feature from feature class 1 comes into contact with the interior or boundary (if a polygon) of a feature from feature class 2 at a point.
Overlaps—The interior of a feature from feature class 1 partly covers a feature from feature class 2. Only features of the same geometry can be compared.

The combinations of geometry types and the spatial relationships that can be used are listed below:

Feature class 1	Feature class 2	Compatible spatial relationship types
Point	Point	Contains Intersects Relation Within
Point	Multipoint	Intersects Relation Touches
Point	Line	Intersects Relation Touches Within
Point	Area	Intersects Relation Touches Within
Multipoint	Point	Contains Intersects Relation Within
Multipoint	Multipoint	Contains Intersects Overlaps Relation Within
Multipoint	Line	Crosses Intersects Relation Touches Within
Multipoint	Area	Crosses Intersects Relation Touches Within
Line	Point	Contains Intersects Relation Touches
Line	Multipoint	Contains Crosses Intersects Relation Touches
Line	Line	Contains Crosses Intersects Overlaps Relation Touches Within Remarque : With the Contains, Relation, and Within spatial relationship types, you can choose to merge features from feature class 2 and find features from feature class 1 with a spatial relationship to the merged lines.
Line	Area	Crosses Intersects Relation Touches Within Remarque : With the Relation and Within spatial relationship types, you can choose to merge features from feature class 2 and find features from feature class 1 with a spatial relationship to the merged polygons.
Area	Point	Contains Intersects Relation Touches
Area	Multipoint	Contains Crosses Intersects Relation Touches
Area	Line	Contains Crosses Intersects Relation Touches Remarque : With the Contains and Relation spatial relationship types, you can choose to merge features from feature class 2 and find features from feature class 1 with a spatial relationship to the merged lines.
Area	Area	Contains Intersects Overlaps Relation Touches Within Remarque : With the Contains, Relation, and Within spatial relationship types, you can choose to merge features from feature class 2 and find features from feature class 1 with a spatial relationship to the merged polygons.

Geometry types and acceptable spatial relationships

In addition to spatial analysis, the Compare Attributes dialog box optionally allows attributes between feature classes to be compared. For example, in the Nautical S-57 data model, sounding points that exist within depth area polygons must have depth (z) field values that are within the minimum and maximum depth (z) field values specified in the depth area polygon that contains them. SQL WHERE clauses can be constructed on the Compare Attributes dialog box to perform attribute comparison on the features along with spatial analysis.

Intersects or Touches and result geometries

The Geometry on Geometry check creates result geometries if features from either the same or two different feature classes share a spatial relationship. If this check uses the Intersects or Touches spatial relationship, result geometries will be points. For example, if you configure the Geometry on Geometry check to validate two polygon feature classes with the Intersect operator, all result geometries will be points. Result points will be created where polygons in the two feature classes intersect.

Inverse relationships

The Geometry on Geometry check also allows you to find features that do not share the spatial relationship you specify. For example, you can search for lines and polygons that do not intersect each other. However, you can only find inverse relationships using the Contains, Crosses, Intersects, Overlaps, Touches, and Within relationship types. You cannot find these types of relationships using the Relation relationship type.

The Relation spatial relationship

When you choose Relation as the spatial relationship type, you can compare any possible spatial intersections between two shapes based on the following three aspects:

Interior—The entire shape, except for its boundary. All geometry types have interiors.
Boundary—The endpoints of all linear parts for line features, or the linear outline of a polygon. Only lines and polygons have boundaries.
Exterior—The outside area of a shape. All geometry types have exteriors.

This spatial relationship is defined using a nine-character string composed of the following characters:

T (true)—The features have interiors, boundaries, and/or exteriors that intersect.
F (false)—The features do not have interiors, boundaries, and/or exteriors that intersect.
0 (nondimensional)—The intersection between the interiors, boundaries, and/or exteriors of the features forms a point.
1 (one dimensional)—The intersection between the interiors, boundaries, and/or exteriors of the features forms a line.
2 (two dimensional)—The intersection between the interiors, boundaries, and/or exteriors of the features forms a polygon.
* (do not check)—An aspect of the relationship between the interiors, boundaries, and/or exteriors is not checked.

The placement of the respective characters is important because it indicates what is going to be checked between the two features. For example, if the first character in the string is T, the Geometry on Geometry check looks at the interiors of features from both feature classes to see if they intersect; or if the first character in the string is 0, the check would return two line features that cross interiors at a point, but not two line features that have any congruent lengths.

Remarque :

The "Not" option cannot be used when the Relation type check is chosen as the spatial relation check.

The order of the characters is as follows:

Character number	Feature class 1	Feature class 2
1	Interior	Interior
2	Interior	Boundary
3	Interior	Exterior
4	Boundary	Interior
5	Boundary	Boundary
6	Boundary	Exterior
7	Exterior	Interior
8	Exterior	Boundary
9	Exterior	Exterior

Spatial relationship parameters

Specific patterns that can be used to find specific relationships are listed in the table below.

Spatial relationship	Selection geometry	Requested geometry	String
Contains	Line	Line	TTFFT**
Contains	Point	Line	TTFFT**
Contains	Point	Point	T********
Contains	Line	Poly	TTFFT**
Contains	Poly	Poly	TTFFT**
Crosses	Line	Line	TFFF***
Crosses	Poly	Line	TTF**
Crosses	Line	Poly	TTT**
Overlaps	Line	Line	TTT****
Overlaps	Point	Point	T********
Overlaps	Poly	Poly	TTT****
Touch	Line	Line	FFFT***
Touch	Poly	Line	FFFT***
Touch	Line	Poly	FFFT***
Touch	Poly	Poly	FFFT***
Within	Line	Line	TFF**
Within	Point	Line	T********
Within	Point	Point	T********
Within	Line	Poly	TFF**
Within	Poly	Poly	TFF**

Examples of strings that would be used in the Spatial Relationship text box are as follows:

Spatial relationship	String to use
Shares a boundary	**T**
Shares a boundary and interiors intersect	T*T**
Shares a boundary and interiors do not intersect	F*T**
Does not touch the boundary and interiors intersect	T*F**
Boundary of a polygon intersects the interior of a line along a congruent length	*1***

Spatial relationship examples

Thèmes connexes

Finding geometries with spatial relationships

Finding features with a spatial relationship to an intersection

4/27/2014