ArcGIS Help 10.2 - Select By Location: graphic examples

This topic covers examples and expected results of the various Relationship options available in the Select Layer By Location geoprocessing tool as well as the Spatial_Join geoprocessing tool.

The WITHIN_A_DISTANCE spatial relationship and 3D spatial relationship operators such as INTERSECT_3D and WITHIN_A_DISTANCE_3D are not included in these graphics. For details on 3D relationships, see Select By Location 3D relationships.

The Select By Location dialog box found in the Selection menu in ArcMap, ArcScene, and ArcGlobe do not use the exact same term as the geoprocessing tool for describing the relationship. The table below contains the terminology mapping.

Geoprocessing tool	Selection\Select By Location
INTERSECT	Target layer features intersect the Source layer feature.
INTERSECT_3D	Target layer features intersect (3d) the Source layer feature.
WITHIN_A_DISTANCE	Target layer features are within a distance of the Source layer feature.
WITHIN_A_DISTANCE_3D	Target layer features are within a distance of (3d) the Source layer feature.
CONTAINS	Target layer features contains the Source layer feature.
COMPLETELY_CONTAINS	Target layer features completely contains the Source layer feature.
CONTAINS_CLEMENTINI	Target layer features contains (Clementini) the Source layer feature.
WITHIN	Target layer features are within the Source layer feature.
COMPLETELY_WITHIN	Target layer features are completely within the Source layer feature.
WITHIN_CLEMENTINI	Target layer features are within (Clementini) the Source layer feature.
ARE_IDENTICAL_TO	Target layer features are identical to the Source layer feature.
BOUNDARY_TOUCHES	Target layer features touch the boundary of the Source layer feature.
SHARE_A_LINE_SEGMENT_WITH	Target layer features share a line segment with the Source layer feature.
CROSSED_BY_THE_OUTLINE_OF	Target layer features are crossed by the outline of the Source layer feature.
HAVE_THEIR_CENTER_IN	Target layer features have their centroid in the Source layer feature.

All details that follow are written using the terminology of the Select Layer By Location tool. However, these details also apply to the Spatial Join tool. The parameter names differ between the tools as follows:

Select Layer By Location has Input Feature Layer; the Spatial Join equivalent is Target Features.
Select Layer By Location has Selecting Features; the Spatial Join equivalent is Join Features.
Select Layer By Location has Relationship; the Spatial Join equivalent is Match Option.

Clementini spatial relationships

WITHIN_CLEMENTINI and CONTAINS_CLEMENTINI refers to the within and contains spatial relationship as defined in the following paper: Clementini, Eliseo, Paolino Di Felice, and Peter van Oosterom, "A Small Set of Formal Topological Relationships Suitable for End-User Interaction," Proceedings of the Third International Symposium on Advances in Spatial Databases, 277–295, June 23–25, 1993.

Contrast of the three contains spatial relationships

Definition of boundary: For lines, the boundary is the two endpoints; for polygons, the boundary is the edge.

CONTAINS—Selects features in the input feature layer that contain a feature in the selecting features layer. The selecting features can be inside as well as on the boundary of the input feature layer.
COMPLETELY_CONTAINS—Selects features in the input feature layer that contain a feature in the selecting features layer, as long as the feature in the selecting features layer does not intersect the boundary of the input feature layer.
CONTAINS_CLEMENTINI—The results are identical to CONTAINS with the one exception: if the feature in the selecting features layer is entirely on the boundary of the input feature layer, with no part of the contained feature properly inside the feature in the input feature layer, the input feature will not be selected. CLEMENTINI states that the boundary of a point is always empty, and the boundary of a line is the endpoints.
CONTAINS and CONTAINS_CLEMENTINI produce identical results with point and multipoint input, and the selecting features are point or multipoint.

Contrast of the three within spatial relationships

WITHIN—Selects features in the input feature layer within or contained by features in the selecting features layer.
COMPLETELY_WITHIN—The result is identical to WITHIN except when the feature in the input feature layer intersects the boundary of the feature in the selecting features layer; then it is not selected.
WITHIN_CLEMENTINI—The result is identical to WITHIN except when the entirety of the feature in the input feature layer is on the boundary of the feature in the selecting features layer. CLEMENTINI states that the boundary of a point is always empty, and the boundary of a line is the endpoints.

Legend for graphics

For all the examples below, the following legend applies:

Input feature: green
Input feature's center: red X
Selecting feature: gray

The graphics are labeled A, B, C, and so on. Each relationship (INTERSECT, CONTAINS, and so on) that is valid for that combination of geometries is listed in the left column of the table. The geometric cases that would be selected for that relationship are listed in the right column of the table.

Select point using point

INTERSECT	A
CONTAINS	A
CONTAINS_CLEMENTINI	A
WITHIN	A
WITHIN_CLEMENTINI	A
ARE_IDENTICAL_TO	A
HAVE_THEIR_CENTER_IN	A

Select point using point table

Select point using multipoint

INTERSECT	A, C
CONTAINS	A
CONTAINS_CLEMENTINI	A
WITHIN	A, C
WITHIN_CLEMENTINI	A, C
ARE_IDENTICAL_TO	A
HAVE_THEIR_CENTER_IN	A, C

Select point using multipoint table

Select point using line

INTERSECT	A, C
WITHIN	A, C
COMPLETELY_WITHIN	A
WITHIN_CLEMENTINI	A
HAVE_THEIR_CENTER_IN	A, C

Select point using line table

Select point using polygon

INTERSECT	A, C
WITHIN	A, C
COMPLETELY_WITHIN	A
WITHIN_CLEMENTINI	A
HAVE_THEIR_CENTER_IN	A, C

Select point using polygon table

Select multipoint using point

INTERSECT	A, C
CONTAINS	A, C
CONTAINS_CLEMENTINI	A, C
WITHIN	A
WITHIN_CLEMENTINI	A
ARE_IDENTICAL_TO	A
HAVE_THEIR_CENTER_IN	A, D

Select multipoint using point table

Select multipoint using multipoint

INTERSECT	A, C, E, F
CONTAINS	A, F
CONTAINS_CLEMENTINI	A, F
WITHIN	A, C
WITHIN_CLEMENTINI	A, C
ARE_IDENTICAL_TO	A
HAVE_THEIR_CENTER_IN	A, D

Select multipoint using multipoint table

Select multipoint using line

INTERSECT	A, C, E, F
WITHIN	A, C, E
COMPLETELY_WITHIN	A
WITHIN_CLEMENTINI	A, E
HAVE_THEIR_CENTER_IN	A, D, E

Select multipoint using line table

Select multipoint using polygon

INTERSECT	A, C, D, E, F
WITHIN	A, C, D, E
COMPLETELY_WITHIN	A
WITHIN_CLEMENTINI	A, D, E
HAVE_THEIR_CENTER_IN	A, B, C, E, F

Select multipoint using polygon table

Select line using point

INTERSECT	A, C, D
CONTAINS	A, C, D
COMPLETELY_CONTAINS	A, D
CONTAINS_CLEMENTINI	A, D
HAVE_THEIR_CENTER_IN	D

Select line using point table

Select line using multipoint

INTERSECT	A, C, D, E
CONTAINS	A, C, E
COMPLETELY_CONTAINS	A
CONTAINS_CLEMENTINI	A, E
HAVE_THEIR_CENTER_IN	D

Select line using multipoint table

Select line using line

INTERSECT	A, C, D, E, F, G, H, I, J
CONTAINS	G, H
COMPLETELY_CONTAINS	G
CONTAINS_CLEMENTINI	G, H
WITHIN	F, H
COMPLETELY_WITHIN	F
WITHIN_CLEMENTINI	F, H
ARE_IDENTICAL_TO	H
BOUNDARY_TOUCHES	C, E

Select line using line table

Select line using polygon

INTERSECT	A, C, D, E, F, G, H, I, J, K, L, M, N, O
WITHIN	A, D, G, H, I, O
COMPLETELY_WITHIN	A
WITHIN_CLEMENTINI	A, D, G, H, I
BOUNDARY_TOUCHES	D, F, G, H, I, K, L, M, N, O
SHARE_A_LINE_SEGMENT_WITH	G, I, J, K, M, O
CROSSED_BY_THE_OUTLINE_OF	C, E, H, L, N
HAVE_THEIR_CENTER_IN	A, C, D, E, G, H, I, J, O

Select line using polygon table

Select polygon using point

INTERSECT	A, B
CONTAINS	A, B
COMPLETELY_CONTAINS	A
CONTAINS_CLEMENTINI	A
HAVE_THEIR_CENTER_IN	A, D

Select polygon using point table

Select polygon using multipoint

INTERSECT	A, B, C, E
CONTAINS	A, B, E
COMPLETELY_CONTAINS	A
CONTAINS_CLEMENTINI	A, B
HAVE_THEIR_CENTER_IN	A, D

Select polygon using multipoint table

Select polygon using line

INTERSECT	A, C, D, E, F, G, H, I, J, K, L, M, N, O
CONTAINS	A, D, G, H, I, O
COMPLETELY_CONTAINS	A
CONTAINS_CLEMENTINI	A, D, G, H, I
BOUNDARY_TOUCHES	D, F, G, H, I, K, L, M, N, O
SHARE_A_LINE_SEGMENT_WITH	G, I, J, K, M, O
CROSSED_BY_THE_OUTLINE_OF	C, E, H, L, N
HAVE_THEIR_CENTER_IN	E, I, L

Select polygon using line table

Select polygon using polygon

INTERSECT	A, C, D, E, F, G, H, I, J, K, M
CONTAINS	C, E, H, M
COMPLETELY_CONTAINS	C
CONTAINS_CLEMENTINI	C, E, H, M
WITHIN	F, G, H, M
COMPLETELY_WITHIN	F
WITHIN_CLEMENTINI	F, G, H, M
ARE_IDENTICAL_TO	H, M
BOUNDARY_TOUCHES	D, E, G, H, I, J, M
SHARE_A_LINE_SEGMENT_WITH	D, H, I, M
CROSSED_BY_THE_OUTLINE_OF	A, E, G, J, K
HAVE_THEIR_CENTER_IN	C, E, F, G, H, K, L

Select polygon using polygon table

Select By Location: graphic examples