Creating a bearing segment (Production Mapping)

The Segment Bearing function computes the point of intersection between a line segment generated between two points and a line segment generated by an azimuth from a selected point.

Example of input and output for the Segment Bearing function
Etapes :
  1. Start ArcMap.
  2. On the menu bar, click Customize > Toolbars > Production Feature Builder.
  3. Click the Feature Builder button Feature Builder on the Production Feature Builder toolbar.

    The Feature Builder window appears.

    AstuceAstuce:

    The Feature Builder window can be placed anywhere in ArcMap, or in the Table Of Contents window, with the aid of the arrows showing the possible placement positions.

  4. Choose Segment Bearing in the list on the Functions tab.

    Feature Builder window with the Segment Bearing function selected

  5. Define a coordinate for the start point of the polyline by doing one of the following:
    • Clicking the Pinprick tool Pinprick on the Production Feature Builder toolbar, then clicking on the map
    • Typing the coordinates in the cells on the Input tab in the Coordinates area
    AstuceAstuce:

    To view the input coordinates on the map, double-click the row headers for each coordinate.

  6. Repeat step 5 to define a coordinate for the end point of the segment and azimuth start point.
  7. Click the cell next to Azimuth and type the azimuth value.

    The azimuth is the angle at which the output coordinate is going to be calculated. The default unit is degrees.

  8. AstuceAstuce:

    You can right-click the parameter name and change the unit of measurement. If you change the unit of measurement after defining a value, the value is converted to the new unit of measurement, and you may need to redefine the value.

  9. If necessary, click the cell next to MagVar Value and type a value for the magnetic variation.

    This can be a specified value or from a field defined in the MagVar Source parameter. The default unit is degrees.

    Learn more about the magnetic variation value

  10. AstuceAstuce:

    You can right-click the parameter name and change the unit of measurement. If you change the unit of measurement after defining a value, the value is converted to the new unit of measurement, and you may need to redefine the value.

  11. If necessary, click the drop-down arrow next to MagVar Source and choose a source for the magnetic variation.

    This is the source of the magnetic variation value.

    Learn more about the magnetic variation source

  12. If necessary, click the drop-down arrow next to MagVar Year and choose a different year for the World Magnetic Model.

    This is the year associated with the magnetic variation value.

    RemarqueRemarque :

    You can only choose a value for MagVar Year if Magnetic Model is selected for the MagVar Source property.

    Learn more about the magnetic variation year

  13. If necessary, click the cell next to Interval and type a value.

    This is the length of the segments that are searched for an intersection between the coordinates and the cutoff point. The default unit is degrees.

    AstuceAstuce:

    You can right-click the parameter name and change the unit of measurement. If you change the unit of measurement after defining a value, the value is converted to the new unit of measurement, and you may need to redefine the value.

  14. Click the cell next to Cutoff and type a value.

    This is the maximum distance that can be searched for an intersection from the third coordinate. The default unit is degrees.

    AstuceAstuce:

    You can right-click the parameter name and change the unit of measurement. If you change the unit of measurement after defining a value, the value is converted to the new unit of measurement, and you may need to redefine the value.

  15. Click the Execute button Execute.

Two lines and an intersection point are created.

AstuceAstuce:

If the segments do not appear, click the Add Scratch Data Layers button Add scratch data layers at the top of the Feature Builder window.

4/26/2014